Description

Technical Parameters

The Yellow Sticky Trap in Shapes is a pesticide-free, UV-stable adhesive pest management tool designed to intercept flying insects such as fungus gnats, whiteflies, thrips, and leafminers.

Product Specifications

Attribute	Specification
Field Longevity	92% tackiness retained after 60 days UV/HID exposure
Shear Strength	40 g/m² coating, secures pests up to 4 mm instantly
Low-Temp Performance	Flexible down to 5°C (41°F), no crystallization
Release Liner	60 g silicone-coated glassine, clean one-piece peel
Shelf Life	36 months at room temperature, sealed packaging
Coating Consistency	±1.5 g/m² surface variance, laser-monitored
Substrate (PP)	350-micron rigid polypropylene, self-standing
Thickness-to-Weight	0.35 mm, +18% container utilization
Edge Finish	Swiss-engineered die-cutting, burr-free edges

Key Benefits

Identifies economic injury thresholds 5 to 7 days faster than visual inspections (at 1 trap per 10 m²), allowing targeted treatment before widespread crop damage.

Formulated with a precise 575 nm yellow wavelength that minimizes the risk of attracting beneficial insects like Bombus terrestris (Bumblebees) in commercial bio-controlled greenhouses.

High-tack adhesive remains physically stable and non-drip up to 55°C (131°F) and 95% RH.

Available in 2% UV-stabilized PP resin for multi-month outdoor commercial farming, or 400 gsm wet-strength compostable cardstock for short-cycle crops.

Custom Service

Precision Engineering: High-speed rotary die-cutting machinery maintains strict physical shape dimensions within a ±0.5 mm tolerance margin.

Rapid OEM Prototyping: Physical CAD-cut functional samples are dispatched within 3 working days from receiving vector artwork (.AI or .DXF formats).

Zero-Cost Standard Tooling: Over 35 field-tested shapes (including Butterfly, Tulip, Tree, and Hexagon) are available immediately with zero tooling or tooling-modification fees.

Application-Specific Mounting: Integrated 45-degree base stakes for soil insertion or reinforced 5 mm punch holes for overhead hanging, customized to your technical drawings.

Supply Chain Support

Flexible MOQs: Minimum order quantity of 20,000 units for catalog shapes with private-label packaging, and 100,000 units for proprietary custom geometries.

High-Volume Capacity: Operating 4 specialized, automated coating and die-cutting lines to secure a monthly output of 4.5 million finished traps for peak-season demands.

Just-in-Time Delivery: Dispatched to FOB port within 21 days for initial orders and 14 days for repeat contract runs, backed by a 98.6% on-time delivery rate for North American and European agricultural windows.

Standardized Export Packaging: Shipped on ISPM-15 heat-treated pallets (1200 mm × 800 mm or 48" × 40") optimized for container loading up to 22 tons per 40 ft HQ. Incoterms, including FOB, CIF, DDP, and FCA, are fully supported.

Agricultural Compliance

North American Market Access: Manufactured in a facility holding a verified US EPA Establishment Number and compliant with National Organic Program (NOP) standards for chemical-free pest management.

European Import Compliance: Certified free of SVHCs (Substances of Very High Concern) and restricted phthalates under REACH Annex XVII, verified by independent SGS third-party audits.

Audited Manufacturing Quality: Factory operates under active ISO 9001:2015 and BSCI frameworks, utilizing a solvent-free hot-melt extrusion system with zero VOC emissions. Full SDS/MSDS documentation is available upon request.

FAQ

Q: How many sticky traps should be installed in a commercial greenhouse?

A: For routine monitoring, install approximately one trap every 10–20 m². During heavy infestations, increasing the density to one trap per 5–10 m² provides more accurate pest population monitoring and faster interception.

Q: At what height should the traps be positioned?

A: Place the traps level with or slightly above the crop canopy, generally 10–20 cm above the highest leaves.

Q: How often should sticky traps be replaced?

A: Replace the traps once more than 70% of the adhesive surface is covered with insects or dust. Under normal greenhouse conditions, replacement is typically recommended every 6–8 weeks.

Q: Can the traps remain effective after rain or overhead irrigation?

A: The polypropylene version maintains its structural stability during outdoor rainfall and overhead irrigation. Heavy dust or mud accumulation, however, may reduce the exposed adhesive area and require earlier replacement.

Q: What is the recommended storage condition before use?

A: Store the traps in their sealed cartons at temperatures between 5°C and 30°C with relative humidity below 70%. Avoid direct sunlight and prolonged compression to preserve adhesive performance throughout the storage period.

Q: Do the decorative shapes like Butterfly or Tulip perform differently in capture efficiency compared to standard rectangular traps?

A: Internal comparative testing showed shaped traps (Butterfly, Hexagon) capture at within 3-5% of standard rectangular trap efficiency per unit surface area.

Q: What technical support is available for OEM customers?

A: Our engineering team provides recommendations on trap dimensions, deployment density, packaging configuration, and artwork optimization before mass production. Sample validation is completed prior to full-scale manufacturing to reduce development risks.

Hot Tags: yellow sticky trap in shapes, China yellow sticky trap in shapes manufacturers, Biodegradable Insect Sticky Trap, Insect Sticky Roller Trap, Insect Sticky Trap and Pheromone, Insect Yellow Glue Trap Boards, sticky trap, Yellow Sticky Trap in Shapes